B&K Precision 2125A Specifikace Strana 10

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 64
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 9
10
Experimentally, it has been established that the heating power of a waveform can be related to a DC
situation by the use of RMS measures. Thus, a 1 volt RMS periodic voltage that causes a 1 ampere
RMS current through a 1 Ω resistor has an average power dissipated in the resistor of 1 watt. Here,
"average" means that the instantaneous power values are averaged over one waveform period or
longer. The use of this relationship applies to any shape of waveform, not just sinusoidal
waveforms.
Non-sinusoidal waveforms
There are other often-encountered waveforms that have special names. The following figure shows
some examples:
Figure 4
a Square wave
b
Pulse waveform
(note the pulse's minimum values here are 0 volts and the peak voltage is 1 volt)
c Triangle wave
d Ramp wave (also called a sawtooth wave)
e Rectified sine wave (
sin()
)
f
Square root wave
(amplitude is proportional to the square root of the time from the start of the wave's period)
All content Copyright © B&K Precision Corporation, except where otherwise noted.
Copying/reprinting/republishing without express written consent prohibited.
Zobrazit stránku 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 63 64

Komentáře k této Příručce

Žádné komentáře